欢迎光临博曼工业公司官网

BMO-8026GP

BMO-8026GP nitrogen generator dedicated for laser cutting has a total power of 60KW, maximum nitrogen output of 260Nm³/h, adjustable nitrogen purity from 85% to 99%, and standard operating pressure of 2.0MPa, compatible with high-power laser cutting machines of 80,000W and above. Equipped with original micro-oxygen laser cutting technology covered by two national invention patents, the unit produces ultra-clean nitrogen through three procedures: air compression, multi-stage purification and holl

share

BMO-8026GP is a 60KW high-power membrane separation nitrogen generator, a supporting gas supply equipment specially developed for auxiliary purge gas in laser metal cutting, compatible with multiple parallel laser cutters of 80,000W and above. The maximum nitrogen output of the equipment is 260Nm³/h, the nitrogen purity can be freely adjusted within 85%-99%, and the maximum adjustable working pressure is 2.0MPa. The equipment pressure, nitrogen flow and overall adaptability fully meet the actual working conditions of laser cutting, balancing cutting cost, processing efficiency and cutting quality. Strict control is implemented on gas cleanliness: oil content ≤0.1mg/m³, dust particle size ≤0.1μm. The whole unit integrates compression, multi-stage purification and hollow fiber membrane separation modules, with full-process filtration to control oil and dust impurities in air source.


The whole gas production process consists of three stages: compression, purification and separation.

First, permanent magnet variable frequency screw air compressor compresses atmospheric air to 1.6MPa.

Second, compressed air passes through  air-oil separator tank, multi-stage precision filters and refrigerated dryer to remove oil, water and dust impurities completely.

Third, purified dry clean air enters hollow fiber polymer membrane separation unit. Nitrogen and oxygen in air are separated based on membrane permeation screening principle, producing finished nitrogen with adjustable purity from 85% to 99% as shielding purge gas for laser cutting.

The outlet dew point of nitrogen is stably -40℃, oil content controlled within 0.01ppm and dust particle size below 0.1μm. It can protect laser cutting heads and protective lenses for a long time, reduce lens loss and lower equipment maintenance cost.


Product Features

  • The central control system uses an intelligent INOVANCE PLC to collect working processes and operating parameters and display them on the LCD.
  • Support data transmission and storage with ordinary PC, and alarm signals can be automatically run on the device without human supervision.
  • Operating efficiency can be improved by 60%, and operating costs are lower.
  • The control system can output control signals to the upper computer to achieve central control of the factory (optional).
  • Nitrogen purity is adjustable from 85% to 99%.
  • The air purification system automatically discharges pollutants and is equipped with non-destructive automatic drainage valves.
  • Constant pressure variable frequency technology ensures energy savings while maintaining stable pressure.

Core Performance Advantages

1. High Cutting Efficiency: Cutting speed is 2 to 3 times faster than oxygen cutting.

2. Less Burrs: Cutting quality is better than air and liquid nitrogen cutting.

3. Cost Efficiency: Overall operating costs are reduced by over 60% compared with traditional liquid nitrogen supply.

4. Superior Purification: Membrane nitrogen generation produces purer gas to better protect the cutting head.

5. Energy Saving: Built-in variable frequency screw compressor lowers power consumption.

6. Easy Operation: Integrated all-in-one structure with independent control panel for simple operation.

 


 


BMO-8026GP
BMO-8026GP nitrogen generator dedicated for laser cutting has a total power of 60KW, maximum nitrogen output of 260Nm³/h, adjustable nitrogen purity from 85% to 99%, and standard operating pressure of 2.0MPa, compatible with high-power laser cutting machines of 80,000W and above. Equipped with original micro-oxygen laser cutting technology covered by two national invention patents, the unit produces ultra-clean nitrogen through three procedures: air compression, multi-stage purification and holl
Long press to look detail
Long by picture save/share
INQUIRY

在线询盘 MORE+
  • 联系人 *

  • 手机 *

  • 描述

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content:


You have no items to require

Add Successfully

BMO-8026GP

立即询盘
INQUIRY

在线询盘 MORE+
  • 联系人 *

  • 手机 *

  • 描述

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content:


You have no items to require

Add Successfully

微信公众号

微信在线客服

Hotlines:

+86-0571-88795060

1st Floor, Building 12, No. 106 Binhe Road, Qingshanhu Street, Lin'an District, Hangzhou City, Zhejiang Province, China

图片展示

Copyright (©) 2018广东某某某重力机械有限公司  备案号:桂ICP备18002245号    网站地图

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.
浙ICP备2026028768号-1